When replacing it, first align the two screw holes in the board with the holes in the bosses. The tabs on the release button are plastic. Dell Latitude C Service Manual 2. Open the computer all the way degrees so that it lies flat against your work surface. Use the pull tab to pull the keyboard flex cable up from its connector on the system board. Remove the four M2. Memory modules are keyed, or designed to fit into their sockets, in only one direction.
|Date Added:||14 July 2012|
|File Size:||15.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Dell Latitude C400 Service Manual
Dell Latitude C Service Manual Hard Drive Hard Drive: Dell Latitude C Service Manual System Board Removal 1 fan 2 reserve battery cable 3 connector for fan extender cable 4 hard-drive connector 5 M2 x 4-mm screw 1 6 memory module socket 7 guide pins 2. Remove the six M2 x 4-mm screws one of which may be captive that secure the critical component shield to the system board, and lift the shield away.
A NOTE indicates important information that helps you make better use. Page 49 Audio Board: Page 38 Palm Rest: To avoid damage to the connector pins, press the keyboard flex cable connector evenly into the interface connector on the system board, and do not reverse the keyboard connector. Dell Latitude C Service Manual file: Open the computer all the way degrees so that it lies flat against your work surface.
Screw Identification Before You Begin: Page 26 Hard Drive: Damage due to servicing that is not authorized by Dell is not covered by your warranty. Fitting the tabs to the slots may be easiest when viewed from above and slightly behind the front edge of the keyboard.
Pull from the modem connector to disconnect the cable. Disconnect all other external cables from the computer, including the IDE modular bay cable if connected.
DELL LATITUDE C SERVICE MANUAL Pdf Download.
Page 55 Battery Latch: Use a small flat-blade latituee to carefully pry around the perimeter of the bezel until the bezel separates from the display assembly. To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
Remove the four M2. The tabs on the release button are plastic. Place your finger under the cover at the indentation, rotate the cover open, and remove it.
Then, as you press the audio board The memory module must be inserted at a degree angle to avoid damaging the connector. Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
Turn the computer right-side up and open the display degrees. The connectors are keyed for correct insertion; do not force the connections.
To continue using , please upgrade your browser.
When reinstalling a screw, you must use a screw of the correct diameter and mdoem. Recommended Tools Before You Begin: You must remove the display assembly before you remove the palm rest. Slide the hard drive straight out of the computer. When replacing it, first align the two screw holes in the board with the holes in the bosses. Page 41 Cooling Fan: Palm Rest Removal Mosem Rest: Dell Latitude C Service Manual 3.