Now, just peel the paper off the sheet, and start modeling! This gives you a control panel with lots of confusing options. With a little imagination you can come up with some superb designs like this fantastic birthday card for the kids. But of course, if you have a good imagination just think what you could achieve. This should pop up a box just as if you were going to print something, listing both your printer and your cutting machine. So I printed out the parts using my inkjet printer.
|Date Added:||9 October 2012|
|File Size:||69.44 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To try out my new cradt, Mel Ebbles of Ebbles Miniatures was kind enough to provide me with his Modular Hills paper model. After you press cut, the machine zooms the carrier sheet back and forth several times for no apparent reason, then begins the cutting operation.
Now comes the cratt where you load the paper into the machine You’ll probably just need to remove the sheet, shift it right or left, and insert it again – but don’t shift it so far that both white wheels can’t grab it.
So I printed out the parts using my inkjet printer.
I ignored the warning, and everything worked fine. It’s called DesignMaster and it opens up a whole new world of designing – allowing you to created welded words at the click of a mouse! Keep your kids amused for hours with some of the wonderful paper crafting projects.
One of the bits of paper is the Setup Instruction Sheet, written in awkward but comprehensible English. At this point, everything should be ready to go.
Your browser security needs to be updated
cratt Next, if you haven’t done so already, is time to put the blade in the machine. ROBO Master was assuming I had a different model of the cutting machine, which was why it couldn’t find the driver. This may cause the paper to ccc300 a slight curl. So I puzzled through the manual for some time When I tried to click the output button, I got an error message about needing to install the driver Alternately, check your printer settings: Here’s the basic idea: Or, rather, you lift the lid, and place the sheet into contact with the white roller wheels.
The left edge of the carrier sheet should align with the rightmost alignment mark on the machine. In other words, the paper feeds into the cratf bottom-first. When you press the Cut button, the machine scans for the bottom registration marks, then advances the page to scan for one of the top registration marks.
Imagine that the carrier sheet rpbo in front of you, with the arrow pointing away from you. The cutting is relatively quiet until the machine does a robk line, which instead of a solid cut, gets a perforated line and the machine makes a sound like a sewing machine. A separate plastic baggy holds the blade a plastic cylinder and three different colored caps – the caps control how deep the blade will cut.
Funtime Scrapbooking – Scrapbooking cutters compatible with FUNTIME SCRAPBOOKING PRO
In the next sub-step, you insert the CD into your computer and begin installing software. Place your sheet of paper printed-side-up, upside down, placing the paper to fit into the top alignment marks especially the righthand one. You then slide the blade into the blade holder on the machine, apparently with the tag pointing to the front the diagram is hard to decipherthen turn the green tab to lock it in place.
This should pop up a box just as if you were going to print something, listing both your printer and your cutting machine. All printers are different, so you may not have this problem Then you specify if crraft cutting pattern is landscape or portrait portrait is the default.
Without having to design anything yourself. This new area gives you the steps to prepare for cutting. The box includes the machine itself which is about the size of a small printerpower supply and cord, USB cable, blade, carrier sheets, CD, and manuals. If that goes well, the software will then ask if you want to proceed to cut. I hate links to places that require me to sign up just to see such a post.
And then I got the prompt from Microsoft, warning that the driver had not been tested or approved by them. When the machine stops, the display on the machine will say “Remove media” – pressing Enter will cause the carrier sheet to be ejected.